off state pins, brightness control
This commit is contained in:
Michael Wesemann
parent
d77e56a5d5
commit
6e3c0a41ce
10
README.md
10
README.md
@ -25,6 +25,8 @@ All functions are controlled by the KY-040 encoder:
|
||||
* **CTIME**: turn changes the interval in minutes for the fish catching function
|
||||
* **RTIME**: turn changes speed rise time in seconds (applies to power on, stirrer on, boost on and fish catching)
|
||||
* **OTIME**: turn changes switch off time in hours (the timer activates immediately, 0 = switch off disabled)
|
||||
* **Other menu options**:
|
||||
* **BRGHT**: LCD brightness
|
||||
|
||||
## Display Indicators:
|
||||
|
||||
@ -40,10 +42,17 @@ All functions are controlled by the KY-040 encoder:
|
||||
|`SPEEDINC`|increment of speed values when turning the encoder|
|
||||
|`FANMIN`|fan minimum speed (should be a value at which the fan runs safely) (rpm)|
|
||||
|`FANMAX`|maximum speed of the fan (it is important that this is the real maximum value of the fan) (rpm)|
|
||||
|`BOFF`|if set boost off will also turn the normal mode off|
|
||||
|`BINC`|BTIME increment (min)|
|
||||
|`CINC`|CTIME increment (min)|
|
||||
|`RINC`|RTIME increment (sec)|
|
||||
|`OINC`|OTIME increment (hour)|
|
||||
|`CATCHSTOP`|stop interval for stir fish catch function (ms)|
|
||||
|`PWM0`, `PWN1`|PWM output pins|
|
||||
|`I0`, `I1`|interrupts for rpm measurement (2 and 3 for Leonardo and ProMicro / 0 and 1 for Uno)|
|
||||
|`CLK`, `DT`, `SW`|pins for KY-040 encoder|
|
||||
|`OFF0`, `OFF1`|these pins will be set if the fan is off|
|
||||
|`OFFSTATE`|off state (LOW/HIGH)|
|
||||
|`RINTERVAL`|regulation interval (ms)|
|
||||
|`RDELAY`|extra regulation delay when value changes (ms)|
|
||||
|`RTOL`|regulation tolerance (rpm)|
|
||||
@ -51,6 +60,7 @@ All functions are controlled by the KY-040 encoder:
|
||||
|`SAVERAGE`|speed measurement average|
|
||||
|`SAVETAG`|parameter save identifier|
|
||||
|`SAVEDELAY`|delay in seconds before parameter will be saved to EEPROM|
|
||||
|`LCDB`|LCD brightness steps (10 values, 0=off, 255=max)|
|
||||
|
||||
## API commands
|
||||
|
||||
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 125 KiB After Width: | Height: | Size: 137 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 128 KiB After Width: | Height: | Size: 140 KiB |
90
stir.ino
90
stir.ino
@ -7,7 +7,7 @@
|
||||
#define SX Serial.print
|
||||
#define SXN Serial.println
|
||||
|
||||
String VERSION = "1.5.7";
|
||||
String VERSION = "1.6.0";
|
||||
|
||||
int SPEEDINC = 50; // speed increment (rpm)
|
||||
|
||||
@ -16,6 +16,7 @@ int FANMAX = 1600; // fan maximum speed (should be the real
|
||||
|
||||
int BOFF = 0; // if set boost off will also turn the normal mode off
|
||||
|
||||
int BINC = 1; // BTIME increment (min)
|
||||
int CINC = 10; // CTIME increment (min)
|
||||
int RINC = 10; // RTIME increment (sec)
|
||||
int OINC = 3; // OTIME increment (hour)
|
||||
@ -24,7 +25,8 @@ long CATCHSTOP = 20000;
|
||||
|
||||
int PWM0 = 9; // PWM pin for 1. fan
|
||||
int PWM1 = 10; // PWM pin for 2. fan
|
||||
|
||||
int PWM2 = 11; // PWM pin for LCD brightness
|
||||
|
||||
int I0 = 2; // interrupt for fan 0 rpm signal (use 2 for Leonardo/ProMicro and 0 for Uno)
|
||||
int I1 = 3; // interrupt for fan 1 rpm signal (use 3 for Leonardo/ProMicro and 1 for Uno)
|
||||
|
||||
@ -32,6 +34,10 @@ int CLK = 5;
|
||||
int DT = 6; // dt on KY-040 encoder
|
||||
int SW = 4; // sw on KY-040 encoder
|
||||
|
||||
int OFF0 = 7; // off state pin 1. fan
|
||||
int OFF1 = 8; // off state pin 2. fan
|
||||
int OFFSTATE = LOW; // off state (LOW/HIGH)
|
||||
|
||||
long RINTERVAL = 5000; // regulation interval (ms)
|
||||
long RDELAY = 3000; // regulation delay on changes (ms)
|
||||
int RTOL = 8; // regulation tolerance (rpm)
|
||||
@ -39,9 +45,11 @@ int RTOL = 8;
|
||||
long SINTERVAL = 2000; // speed measurement interval
|
||||
int SAVERAGE = 4; // speed measurement average
|
||||
|
||||
int SAVETAG = 1011; // save tag
|
||||
int SAVETAG = 1012; // save tag
|
||||
long SAVEDELAY = 10000; // EEPROM save delay (ms)
|
||||
|
||||
byte LCDB[] = {4,8,16,24,32,64,96,128,192,255}; // LCD brightness steps (10 values, 0=off, 255=max)
|
||||
|
||||
byte aright[] = {0x00,0x08,0x0C,0x0E,0x0C,0x08,0x00,0x00}; // LCD character
|
||||
byte aup[] = {0x04,0x0E,0x1F,0x00,0x00,0x00,0x00,0x00};
|
||||
|
||||
@ -53,6 +61,7 @@ long xts,sts,rts,swts,buts,savets,catts[2],stop[2],bts[2],vts[2],ots[2];
|
||||
int bdelay,bprocess=0,enclast,encval,M=2,S=0; // button/encoder processing
|
||||
int F[2],bstate[2]={0},btime[2],cat[2],ctime[2],cstate[2]={0},bclr=0,SAVE=0,LOCK=0; // operating states
|
||||
int ostate[2]={0},otime[2]={0}; // off timer
|
||||
int brght; // LCD brightness
|
||||
char form[8],out[20];String cmd[8];int icmd[8]; // string buffer
|
||||
|
||||
|
||||
@ -60,9 +69,10 @@ void setup() { /////////////////////////////////////////////////////////////////
|
||||
Serial.begin(9600); // start serial
|
||||
|
||||
lcd.init();lcd.clear();lcd.backlight();lcd.createChar(0,aright);lcd.createChar(1,aup); // initialize lcd
|
||||
pinMode(PWM0,OUTPUT);pinMode(PWM1,OUTPUT); // set PWM pins
|
||||
pinMode(CLK,INPUT);pinMode(DT,INPUT);pinMode(SW,INPUT); // set KY-040 pins
|
||||
pinMode(PWM0,OUTPUT);pinMode(PWM1,OUTPUT);pinMode(PWM2,OUTPUT); // setup PWM pins
|
||||
pinMode(CLK,INPUT);pinMode(DT,INPUT);pinMode(SW,INPUT); // setup KY-040 pins
|
||||
digitalWrite(CLK,true);digitalWrite(DT,true);digitalWrite(SW,true); // turn ON pullup resistors
|
||||
pinMode(OFF0,OUTPUT);pinMode(OFF1,OUTPUT); // setup off state pins
|
||||
|
||||
attachInterrupt(I0,rpmint0,FALLING); // setup interrupts vor rpm in
|
||||
attachInterrupt(I1,rpmint1,FALLING);
|
||||
@ -73,14 +83,18 @@ void setup() { /////////////////////////////////////////////////////////////////
|
||||
SAVE=0; // load/initialize settings
|
||||
if (eer(0)!=SAVETAG) {
|
||||
for (int i=0;i<2;i++) {;v[i]=300;b[i]=700;btime[i]=30;cat[i]=0;ctime[i]=120;rtime[i]=60;F[i]=0;}
|
||||
brght=5;
|
||||
eew(0,SAVETAG);save();
|
||||
} else {
|
||||
for (int i=0;i<2;i++) {
|
||||
v[i]=eer(1+i);b[i]=eer(3+i);btime[i]=eer(5+i);cat[i]=eer(7+i);
|
||||
ctime[i]=eer(9+i);F[i]=eer(11+i);rtime[i]=eer(13+i);
|
||||
}
|
||||
brght=eer(15);
|
||||
}
|
||||
|
||||
lset();
|
||||
|
||||
enclast=digitalRead(CLK); // get encoder state
|
||||
|
||||
for (int i=0;i<2;i++) catts[i]=stop[i]=vts[i]=ots[i]=MS;xts=sts=rts=swts=buts=savets=MS; // timer
|
||||
@ -193,7 +207,7 @@ void loop() { //////////////////////////////////////////////////////////////////
|
||||
save();updatespeed();bdelay=0;
|
||||
|
||||
} else if (bdelay>0 && bdelay<20 && !LOCK) { // short button press, switch: menu -> fan 0 -> fan 1
|
||||
M++;if (M>2) M=0;
|
||||
M++;if (S==7 && M==1) M=2;if (M>2) M=0;
|
||||
updatemarker();
|
||||
bdelay=0;
|
||||
}
|
||||
@ -209,24 +223,26 @@ void loop() { //////////////////////////////////////////////////////////////////
|
||||
if (digitalRead(DT) != encval) { // turn encoder clockwise
|
||||
if (M==2) S++; // scroll menu
|
||||
else {
|
||||
if (S==0) v[M]+=SPEEDINC; // fan 0 speed up
|
||||
if (S==1) b[M]+=SPEEDINC; // boost 0 speed up
|
||||
if (S==2) btime[M]++; // boost time 0 up
|
||||
if (S==3) cat[M]++; // cat 0 on/off
|
||||
if (S==4) ctime[M]+=CINC; // cat time 0 up
|
||||
if (S==5) rtime[M]+=RINC; // rise time 0 up
|
||||
if (S==6) otime[M]+=OINC; // off time 0 up
|
||||
if (S==0) v[M]+=SPEEDINC; // fan speed up
|
||||
if (S==1) b[M]+=SPEEDINC; // boost speed up
|
||||
if (S==2) btime[M]+=BINC; // boost time up
|
||||
if (S==3) cat[M]++; // cat on/off
|
||||
if (S==4) ctime[M]+=CINC; // cat time up
|
||||
if (S==5) rtime[M]+=RINC; // rise time up
|
||||
if (S==6) otime[M]+=OINC; // off time up
|
||||
if (S==7) brght++; // increase LCD brightness
|
||||
}
|
||||
} else { // turn encoder counterclockwise
|
||||
if (M==2) S--; // scroll menu
|
||||
else {
|
||||
if (S==0) v[M]-=SPEEDINC; // fan 0 speed down
|
||||
if (S==1) b[M]-=SPEEDINC; // boost 0 speed down
|
||||
if (S==2) btime[M]--; // boost time 0 down
|
||||
if (S==3) cat[M]--; // cat 0 on/off
|
||||
if (S==4) ctime[M]-=CINC; // cat time 0 down
|
||||
if (S==5) rtime[M]-=RINC; // rise time 0 down
|
||||
if (S==6) otime[M]-=OINC; // off time 0 down
|
||||
if (S==0) v[M]-=SPEEDINC; // fan speed down
|
||||
if (S==1) b[M]-=SPEEDINC; // boost speed down
|
||||
if (S==2) btime[M]-=BINC; // boost time down
|
||||
if (S==3) cat[M]--; // cat on/off
|
||||
if (S==4) ctime[M]-=CINC; // cat time down
|
||||
if (S==5) rtime[M]-=RINC; // rise time down
|
||||
if (S==6) otime[M]-=OINC; // off time down
|
||||
if (S==7) brght--; // decrease LCD brightness
|
||||
}
|
||||
}
|
||||
|
||||
@ -234,14 +250,15 @@ void loop() { //////////////////////////////////////////////////////////////////
|
||||
|
||||
if (M!=2) {
|
||||
if (S<=1) {;updatePWM();rts=MS+RDELAY;} // apply (boost) speed change
|
||||
if (S==2) btime[M]=cut(btime[M],0,60); // check boost time
|
||||
if (S==2) btime[M]=cut(btime[M],0,99); // check boost time
|
||||
if (S==3) {;cat[M]=cut(cat[M],0,1);catts[M]=MS;} // check cat
|
||||
if (S==4) ctime[M]=cut(ctime[M],60,240); // check cat time
|
||||
if (S==5) rtime[M]=cut(rtime[M],0,240); // check rise time
|
||||
if (S==6) oset(M,otime[M]); // check off time
|
||||
if (S==7) lset(); // set LCD brightness
|
||||
}
|
||||
|
||||
if (M==2) S=cut(S,0,6); // check menu mode
|
||||
if (M==2) S=cut(S,0,7); // check menu mode
|
||||
|
||||
SAVE++;updatelcd();delay(50);
|
||||
}
|
||||
@ -252,6 +269,11 @@ void loop() { //////////////////////////////////////////////////////////////////
|
||||
|
||||
/////////////////////////////////////////////////////////////////////////////////////////////////////// SUPPORT
|
||||
|
||||
void lset() { ////////////////////////////////////////////////////////////////////////////// set LCD brightness
|
||||
brght=cut(brght,0,9);
|
||||
analogWrite(PWM2,LCDB[brght]);
|
||||
}
|
||||
|
||||
void oset(int n,int t) { ///////////////////////////////////////////////////////////////// set switch off timer
|
||||
otime[n]=cut(t,0,99);ots[n]=MS;ostate[n]=otime[n]?1:0;
|
||||
SAVE++;
|
||||
@ -259,19 +281,21 @@ void oset(int n,int t) { ///////////////////////////////////////////////////////
|
||||
|
||||
void fset(int n,int s) { /////////////////////////////////////////////////////////////// set fan state (on/off)
|
||||
if (s==1) {
|
||||
rts=MS+RDELAY;F[n]=1;catts[n]=vts[n]=MS;r[n]=0;updatePWM();
|
||||
rts=MS+RDELAY;F[n]=1;catts[n]=vts[n]=MS;r[n]=0;
|
||||
} else {
|
||||
F[n]=0;bstate[n]=0;
|
||||
}
|
||||
updatePWM();
|
||||
SAVE++;
|
||||
}
|
||||
|
||||
void bset(int n,int s) { ///////////////////////////////////////////////////////////// set boost state (on/off)
|
||||
if (s==1) {
|
||||
rts=MS+RDELAY;bstate[n]=1;bts[n]=MS;F[n]=1;vts[n]=MS;
|
||||
rts=MS+RDELAY;bstate[n]=1;bts[n]=MS;F[n]=1;vts[n]=MS;
|
||||
} else {
|
||||
bstate[n]=0;rts=MS+RDELAY;updatePWM();
|
||||
bstate[n]=0;rts=MS+RDELAY;
|
||||
}
|
||||
updatePWM();
|
||||
SAVE++;
|
||||
}
|
||||
|
||||
@ -288,6 +312,7 @@ void updatelcd() { /////////////////////////////////////////////////////////////
|
||||
if (S==5) {;slcd(1,1,5,"RTIME");ilcd(7+i*5,1,-4,int(rtime[i]));}
|
||||
if (S==6) {;slcd(1,1,5,"OTIME");ilcd(7+i*5,1,-4,int(otime[i]));}
|
||||
}
|
||||
if (S==7) {;slcd(1,1,5,"BRGHT");ilcd(7,1,-4,brght);slcd(7+5,1,-4," ");}
|
||||
}
|
||||
|
||||
void updatemarker() { ////////////////////////////////////////////////////////////////////// update menu marker
|
||||
@ -328,9 +353,17 @@ void calcramp(int i) { /////////////////////////////////////////////////////////
|
||||
xv[i]=v[i];xv[i]=cut(((v[i]-FANMIN)/(rtime[i]*1000.0)*(MS-vts[i]))+FANMIN,FANMIN,v[i]);
|
||||
}
|
||||
|
||||
void setPWM(int n,int v) { ///////////////////////////////////////////////////////////////// set value to OCR1x
|
||||
if (n==0) OCR1A=v;
|
||||
if (n==1) OCR1B=v;
|
||||
void setPWM(int n,int v) { /////////////////////////////////////////// set value to OCR1x and states to off pin
|
||||
if (n==0) {
|
||||
OCR1A=v;
|
||||
if (v==0) digitalWrite(OFF0,OFFSTATE?HIGH:LOW);
|
||||
else digitalWrite(OFF0,OFFSTATE?LOW:HIGH);
|
||||
}
|
||||
if (n==1) {
|
||||
OCR1B=v;
|
||||
if (v==0) digitalWrite(OFF1,OFFSTATE?HIGH:LOW);
|
||||
else digitalWrite(OFF1,OFFSTATE?LOW:HIGH);
|
||||
}
|
||||
}
|
||||
|
||||
void updatePWM() { ////////////////////////////////////////////////////////////// update PWM output (fan speed)
|
||||
@ -356,6 +389,7 @@ void save() { //////////////////////////////////////////////////////////////////
|
||||
eew(1+i,v[i]);eew(3+i,b[i]);eew(5+i,btime[i]);eew(7+i,cat[i]);
|
||||
eew(9+i,ctime[i]);eew(11+i,F[i]);eew(13+i,rtime[i]);
|
||||
}
|
||||
eew(15,brght);
|
||||
}
|
||||
|
||||
int cutcmd(String data) { ///////////////////////////////////////////////////////////// get saperated substring
|
||||
|
||||
Loading…
Reference in New Issue
Block a user